Loading...

TROUBLE SHOOTING

 

Motor Does Not Work, But The LCD Is On And Is Showing No Error:
If your motor stops working but the LCD stays on and there are no error codes. The first thing to check is the two motor inhibitors located on the brake lever.

The motor inhibitor switch (or motor cut sensor) is designed to turn the motor off when you use the brakes. This is a safety feature to prevent the simultaneous operation of the throttle and the brake.

In some instances, the motor inhibitors can be activated even when you are NOT using the brakes. The result is that the e-bike will not provide assistance with either the throttle or the pedal assist.

Spokes Hitting The Front Calliper:
If you hear the spokes touch the front calliper, here are a few things to check out:
1、Remove and re-seat the front wheel, make sure it sits properly on the front fork.
2、Check to see the wheel is centred on the fork
3、Inspect to see the spokes are tightened properly
4、Check your calliper is tightly secured to the fork
5、Check your calliper to be lined up properly

There Is A Noise Coming From My E-Bike:
Firstly try to locate the noise, and shoot a video or photos and send to our customer support. This email address is being protected from spambots. You need JavaScript enabled to view it.

Customer Care

  • Phone(Fax):+1 2365477718
  • Mobile:+1 2367889756
  • Shop Phone:+1 7785372184
  • Email:sales@maxbik.com

Location

Service Center(Shop Address):
104 A 15252 – 32nd Avenue, Surrey, BC V3S 0R7 (Phone: 7785372184)

Company Address:
17238 2ND AVE, SURREY BC, CANADA

Sign up for our newsletter